SD – LCS2 (TIS) 2 Pole 2kA Supply Disconnector
Provides distribution of power from substations and track isolation.
Switchgear Enclosures (SE), Switch / Disconnector (SD),
- Large isolation distance
- Self-cleaning contacts
- High resistance to short circuit currents
- Padlock facilities for both open and closed
- Heavy duty insulated operating handle
- Insulating Gland Plates
|On / Off load||Off Load|
Product number: 8800253
Mounting frame for floor standing installation of LCS 2 products.
Mounting and cable clamp kit
Product number: 856203
Accessories kit for the mounting of LCS 2 products.
Twin Mounting frame
Product number: 8800349
Twin mounting frame to mount a pair of LCS 2’s on a single frame.
Where two alternative feeds are required two LCS 2’s can be provided on one twin frame. These LCS2’s need to be equipped with the normally optional interlock facility and microswitches to ensure that only one of the pair can be ‘CLOSED’ at a time.
Enclosure Type: GRP
IP Rating: IP565mm and 10mm heavy duty GRP enclosure. Low profile allowing the enclosure to be mounted close to the track.
InstallationThe switch can be installed by the following methods:
- Back to back mounting frame (Available from LCS see below)
- Wall mounted (Vertical)
2 x 240mm2 Aluminium positive cable in and out