SD -CRHP Conductor Rail Heating Panel
Provides isolation and fuse protection for 2 lengths of conductor rail heating strip. The circuit is protected by four traction grade fuses.
Combined Assemblies & Frames (CA),
- Separate sections & 100mm clearance with central barriers EM42 for positive and negative poles for:
- Switch Disconnector SD 1
- Switch Disconnector SD 2
- Statutory safety labels
|On / Off load||On Load|
250A 1000V DC on load / fault make motorised DC21A duty
250A 1000V DC on load / fault make manual DC21A duty Heavy duty insulated Handle Pad lockable in 'OPEN' or 'CLOSED' positions.
1000V DC Fuses FS1 - FS4
63A Fuses (De-rated to 56A in fuse holders) or 125A Fuses or 160A Fuses depending upon heater strip type (See Variants below)
Enclosure Type: GRP
IP Rating: IP56Heavy duty GRP cabinets, hot press moulded, reinforced polyester enclosure, Complies with general requirements for empty enclosures conforming to EN 62208: 2003 (EN 50298: 1999). Resistance to external mechanical impact: IK 10 (5 joules) conforming to EN 50 102. External & Internal Colour - RAL 7032 Grey IP 56 sealing conforming to IEC 529 (EN 60529) Self-extinguishing conforming to IEC 695-2-1 (960 °C) Temperature resistance: – 50...+ 150 °C Resistant to principal chemical agents and corrosive atmospheres & UV light stabilised. Comply with constraints relating to installation of double insulated panels conforming to standard IEC 439-1 (EN 60439-1) Front panel has Network Rail approved 3 point locking with a barrel to suit Network Rail. Low profile allowing the enclosure to be mounted close to the track Insulating Gland Plates