PP 2 Pole Power Pedestal 150A
Product Number:
8800291
The Road 630V DC is then fed directly from the Contactor to the Power Pedestal. Two 110V AC control supply is also derived from the respective Contactor panel. The Shore Supply Plug is fitted with a Plug Engaged sensor which inhibits the application of Traction Power to the train unless a magnet in the train receptacle to detected. The Pedestal supplies Traction Power to trains in depot lifting sheds via a Shore Supply Plug. The Shore Supply Plug is stowed in the area underneath the Local Operator Station and the cable is coiled either on the end of a middle road enclosure or on the boom or wall bracket for outer road enclosures. There is a frangible link that disconnects under strain thus preventing damage to the pedestal should the train be moved out of the depot with the plug remaining in the train receptacle. Shore supply status beacons are positioned on top of the Power Pedestal enclosure
Applications:
Combined Assemblies & Frames (CA),
Approvals:
LU approved,
Alternative Product
OST 2 Pole Overhead Switchable Trolley (200A)
The Overhead Switchable Trolley mounts on a 4 inch wide overhead ‘I’ beam.
The Road 630V DC is then fed directly from the Contactor to the 630V DC Traction Power supply overhead supply bars. The Trolley Brush collectors pick up the supply from the supply bars.
Two 110V AC control supply collectors pick up the supply from two control bars fitted along the length of each road.
The Shore Supply Plug is fitted with a Plug Engaged sensor which inhibits the application of Traction Power to the train unless a magnet in the train receptacle to detected.
The Trolley supplies Traction Power to trains in the depot area via a Shore Supply Plug. The Shore Supply Plug is stowed in the area underneath the Local Operator Station and hangs from the Trolley.
There is a high level frangible link that disconnects under strain thus preventing damage to the trolley should the train be moved out of the depot with the plug remaining in the train receptacle.
Key Features
- IP54
- Protected for internal use
- 60mm Electrical Clearance
- Doors that give access for maintenance are interlocked with the road contactor panel isolator
- The lower left hand section houses the two traction fuses and the supply connection lugs
- The top section houses the contactor, the voltage monitor & fuses, isolation relay and earth leakage CT
- The lower right hand section houses the earth leakage detector and the control equipment
Product Specifications:
| On / Off load | On Load |
|---|---|
| System Voltage | 630V |
| Rated Voltage | 900V |
| Normal Current | 150A |
| Contactor | Traction grade bar type 2 pole |
| Fuse | Positive and negative traction grade fuses |
| Length | 1010mm |
| Depth | 430mm |
| Height | 530mm |
| Weight | 105kg |
Construction
Core specs
Enclosure Type: Steel
IP Rating: IP54
Floor mounted installation with 50mm2 cables.